APPLICATION GUIDE

How to Apply Embroidered Patches

Apply your Falcon iron-on embroidered patches with confidence. Follow our heat press guide for correct placement, pressing and cooling.

Shop Embroidered Patches

PREPARE & WATCH

Before You Start

Get your supplies ready, then watch our video to learn how to position, heat press and cool your Falcon iron-on embroidered patches.

Heat Press MachineSet to 325°F / 163°C and press for 15 seconds with firm, even pressure.
Silicone Upper Platen CoverRecommended for smooth pressing and garment protection.
Heat-Resistant Foam PadRecommended for seams, pockets, hats and uneven surfaces.
Falcon Embroidered PatchesUse patches with iron-on backing for this application method.
Thermal Heat TapeSecure all patch edges to prevent movement during pressing.

Peel Off the Backing

Take your embroidered patch and carefully peel off the paper backing to expose the adhesive underneath.
Position and Secure Your Patch

Place the patch exactly where you want it on your garment. Once you’re happy with the placement, secure all edges with heat-resistant tape to prevent the patch from shifting or sliding during pressing.
Flip the Garment and Heat Press

Turn the garment over so the patch faces down against the heat press plate. This protects the embroidery and allows even pressing through the fabric. Press at 325°F / 163°C for 15 seconds, using firm, even pressure.
Let It Cool and Finish

Allow the garment and adhesive to cool completely before removing the heat-resistant tape and lifting the garment off the press. Your iron-on embroidered patch is now bonded to the fabric. Leave it undisturbed until the adhesive has fully set and dried—do not pull at the patch or test the bond before then.